Vega VEGAFLEX 83 Modbus and Levelmaster protocol PFA in Manual de usuario descargar pdf (Pagina 51)

7 Setting up sensor and Modbus interface with PACTware

VEGAFLEX 83 • Modbus and Levelmaster protocol

41838-EN-130314

Device name

Here, you can nd the instrument name. You cannot change this line

because the instrument name is unmodiably saved in the instrument.

Serial number

Here, you can nd the serial number of your instrument. You cannot

change this line because the serial number is unmodiably saved in

the instrument.

Measurement loop name

Here you can enter a suitable measurement loop name for your VE-

GAFLEX 83. You can enter a name with max. 19 characters. You can

use capital and small letters as well as numbers. The following special

characters are also possible: + - . : , ( ) / < >

Probelengthmodied?

If you have modied the probe length, this must be entered in the

selection eld.

•

If you select "No", then the instrument uses automatically the

preset length of the default setting.

•

If you select "Yes ", then you can enter in another eld the modied

length of the instrument.

Probe length L from seal surface

If you have modied the length of the probe, you can enter in this eld

the modied probe length. Keep the selected unit in mind.

Determine probe length automatically

If you do not know the probe length, you can have the length of the

probe determined automatically. The requirement for this is a probe

unrestricted and not covered by the medium.

Click to "Carry out now", to start the automatic length determination.

Product type

Here you can see which medium type your instrument is suitable for.

If this function is inactive, the medium type your instrument is suitable

for was already preset.

Information:

In special cases you can change the medium type. This setting can be

changed under "Extended adjustment".

Application

In this eld you can select the application you want to use your instru-

ment for. You have the following selection options:

•

Level in the vessel

•

Level in the bypass/standpipe

•

Interface in the vessel

•

Interface in the bypass/standpipe

•

Demonstration mode

Level measurement: If you select "Level", you can select the proper-

ties of the medium in another eld.

Step 2 of 7

Application

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 95 96

Comentarios a estos manuales

Sin comentarios

Vega VEGAFLEX 83 Modbus and Levelmaster protocol PFA in Manual de usuario Pagina 51

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Vega VEGAFLEX 83 Modbus and Levelmaster protocol PFA in