Vega VEGAFLEX 83 Modbus and Levelmaster protocol PFA in Manual de usuario descargar pdf (Pagina 27)

6 Set up with the display and adjustment module

VEGAFLEX 83 • Modbus and Levelmaster protocol

41838-EN-130314

•

Software version (SW-Ver)

•

Hardware version (HW-Ver)

With the [->] key you can move between three dierent indication

modes.

In the rst view, the selected measured value and a respective bar-

graph presentation are displayed.

In the second view, the selected measured value as well as a second

selectable value, e.g. the temperature value are displayed.

In the third view, the selected measured value is displayed in large

letters.

6.4 Parameter adjustment - Quick setup

To quickly and easily adapt the sensor to the application, select

the menu item "Quick setup" in the start graphic on the display and

adjustment module.

You can nd "Extended adjustment" in the next sub-chapter.

Measurement loop name

In the rst menu item you can assign a suitable measurement loop

name. You can enter a name with max. 19 characters.

Product type

In the next menu item you can see which product type the instrument

is suitable for. If your instrument is only suitable for a certain medium,

this menu item is not visible.

Application

In this menu item, you can select the application. You can choose

between level measurement and interface measurement. You can

also choose between measurement in a vessel or in a bypass or

standpipe.

Medium - dielectric constant

In this menu item, you can dene the medium type (product).

Max. adjustment

In this menu item, you can enter the max. adjustment for the level.

Measured value indica-

tion

Quick setup

General information

evel measurement

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 95 96

Sin comentarios

Vega VEGAFLEX 83 Modbus and Levelmaster protocol PFA in Manual de usuario Pagina 27