Vega WHA-GW-WIRELESSHART GATEWAY Manual de usuario descargar pdf (Pagina 77)

WHA-GW-*

Operation

221981 2011-07

6.3.4 Set device address

The table in the Set device address window shows the WirelessHART devices in the

network. The device address is the device long tag stored in the device.

Figure 6.11Additional Functions > Set device address

Changing the device address

1. Place the cursor inside a cell of the Long Tag column.

2. Change the device long tag as required. You may change the long tags of several

devices at once, if needed.

3. To apply the new DTM address(es) press Update changed tags.

The new DTM addresses are stored to the devices.

Note!

Additional functions > Set device address is available only online (connection to the

gateway and the WirelessHART device(s) active).

Note!

The Device Long Tag parameterized in the Set Device Address window must be identical

with the Device Long Tag of the same device parameterized in the Set DTM Address

window (see chapter 6.3.3). Otherwise the DTM is not able to establish a connection to the

device.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 95 96

Sin comentarios

Vega WHA-GW-WIRELESSHART GATEWAY Manual de usuario Pagina 77