Vega VEGABAR 64 4 … 20 mA_HART Manual de usuario descargar pdf (Pagina 51)

Connect the sensor to power supply and provide connection from PC

to the

instrument via VEGACONNECT. Start PA CTware and provide

connection to the sensor, e.g. via the VEGA project assistant. Close

the parameter window of the sensor, as far as open.

Go in the PACTware menu bar to "Instrument data", "Additional

functions" and "Update instrument software".

PACTware checks now the actual hardware and software version of

the sensor and displays the data. This procedure lasts approx. 60 s.

Push the button " Update software" and select the previously

extracted hex ﬁle. Then the software update can be started. Further

ﬁles are installed automatically. Depending on the sensor, this

procedure lasts approximately 1 h.

8.6 Instrument repair

If a repair is necessary, please proceed as follows:

You can download a return form (23 KB) from our Internet homepage

www.vega.com under: "Dow

nloads - Forms and certiﬁcates - Repair

form".

By doing this you help us carry out the repair quickly and without

having to call back for needed information.

l Print and ﬁll out one form per instrument

l Clean the instrument and pack it damage-proof

l Attach the completed form and, if need be, also a safety data

sheet outside on the packaging

l Please ask the agency serving you for the address of your return

shipment. You can ﬁnd the respective agency on our website

www.vega.com

unde

r: "Compa

ny - VEGA worldwide"

Prepare update

Load software into sen-

sor

VEGABAR 64 • 4 … 20 mA/HART 51

8 Maintenance and fault rectiﬁcati

27525-EN-081209

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 79 80

Sin comentarios

Vega VEGABAR 64 4 … 20 mA_HART Manual de usuario Pagina 51